Google Analytics Tag
Call us today on
for your obligation-free quote!
Search

Phoenix D2000 Diesel Fire Pump

Description

D2000 Diesel Fire Pump

A large diesel portable fire pump that combines the benefit of high pressure fire fighting performance with large water transfer properties.

Overview of the D2000 Diesel Fire Pump:

EASY TO USE CONTROL PANEL

SIMPLE AND RAPID PRIMING – Fast and effective priming is provided by the simple to operate exhaust eject primer. The pump will prime 3 metres in 20 seconds and to a maximum of 7 metres.

HIGH PERFORMANCE DIESEL ENGINE – Engine Model 4JB1 (4 cylinder inline diesel, OHV, Direct injection, Naturally aspirated, water-cooled through heat exchanger, compression ratio 18.2:1, 57kW @ 3600 RPM, minimum fuel consumption at full load 230g/kWh.

SUPERIOR CORROSION RESISTANT CONSTRUCTION – Stainless steel is used on all fabricated parts. Spring loaded handles allow for multiple carrying positions. Marine Grade Aluminium Alloy pump end. Optional extras include a detachable wheel set that is manufactured from corrosion resistant material.

Marine Firefighting and Salvage

At 2000 litre/minute at 7 bar means a marine fire service can run four 500 litre/minute hand lines effortlessly. In other salvage relief situations where flow rather than pressure is critical, the D2000 Diesel Fire Pump gives exceptional performance delivering over 2500 litres/minute (with flooded suction). When you need big and grunty the D2000 is it.

D2000 Diesel Fire Pump Specifications:

Engine:

  • Engine Series: 4JB1 57kW
  • Description: 4 cylinder inline diesel, OHV, Direct injection, Naturally aspirated, water-cooled through heat exchanger, minimum fuel consumption at full load 230g/kWh
  • Displacement: 2700cc
  • Type: 4 cycle
  • Lubrication: Full Pressure Lubrication
  • Starting: 12 volt Electric Starter
  • Fuel Tank: Integral 16 Litre – 1 hour run time
  • Battery: 12 Volt
  • Maximum Power: 57kW @ 3600 RPM

 

Pump:

  • Type of Pump Transfer: Combination: Pressure/Volume
  • Intake: 100mm BSRT Female BSP
  • Discharge: Twin 64mm Globe Valves
  • Volute Body and Head: Marine Grade Aluminium Alloy CC601 heat treated to T6 Hardness
  • Impeller: Marine Grade Aluminium Alloy CC601 Fully Enclosed.
  • Wear Rings: Long Wearing Acetyl, Economical to replace.
  • Shaft Seal: Spring Loaded Mechanical
  • Priming: Fast and effective priming is provided by the simple to operate exhaust eject primer. The pump will prime 3 metres in 20 seconds and to a maximum of 7 metres.
  • Frame Type: Full Wrap Around Stainless Steel

 

Operating Controls:

All the Operating Controls and Instrumentation are located in one area making it easy to read and operate:

  • Engine ON/OFF Switch
  • Automatic engine pre-heat for cold starts
  • Push Button Start
  • Engine Hours Run Meter
  • Throttle Control
  • Alternator Charge Warning Lamp
  • Pump Pressure Gauge
  • Outlet pressure gauge
  • Pump Compound Gauge
  • Flexible Halogen night light
  • Water Temperature Gauge
  • Battery Voltage Meter
  • Oil Pressure Gauge
  • Fuel Level Gauge

Frame: Stainless Steel Full Cage; Fold-away handles with rubber hand grips; 100mm rubber wheels for one man portability
Dimensions: 1020mm (L) x 605mm (W) x 760mm (H)
Weight: 321kg (incl battery)

See the Phoenix D600 Portable Fire Pump

If you need a portable fire fighting pump that will perform like a fire appliance, Phoenix Fire Pumps are what you need!

Add to quote