Call us today on
for your obligation-free quote!
Search

D600 Phoenix Diesel Portable Fire Pump

Description

D600 Phoenix Diesel Portable Fire Pump

A lightweight portable diesel powered fire pump that combines the benefit of high pressure fire fighting performance with optimum water transfer properties.

D600 typical performance @ 3 metres suction lift:

200 kPa (29 PSI) 1530 Litres/min
300 kPa (43.5 PSI) 1350 Litres/min
500 kPa (72.5 PSI) 925 Litres/min
700 kPa (101.5 PSI) 600 Litres/min
800 kPa (116 PSI) 300 Litres/min

The D600 is our premier diesel powered pump, high performance, great economy.

SIMPLE AND RAPID PRIMING
Fast and effective priming is provided by the simple to operate stainless steel exhaust eject primer. The pump will prime 3 metres in 20 seconds and to a maximum of 6 metres.

CORROSION RESISTANT FRAME CONSTRUCTION WITH MULTI-DIRECTIONAL HANDLES

Exceptionally strong stainless steel frame with spring loaded handles to allow for multiple carrying positions. Stainless steel is used on all fabricated parts. Aluminium Alloy pump end. Fold down wheel set.

All the Operating Controls and Instrumentation are located in one area making it easy to read and operate:

FEATURES

  • Engine ON/OFF/START switch
  • Engine Hours Run Meter
  • Throttle Control
  • Choke Control
  • Low Oil Pressure Warning Lamp
  • Alternator Charge Warning Lamp
  • Pump Pressure Gauge
  • Pump Compound Gauge
  • Fold Down Wheel Set
  • LED Panel lighting

D600 Specifications:

Engine:

  • Engine Series: Kohler KD425Description: Twin air-cooled, overhead valve
  • Displacement: 851cc
  • Type: 4 cycle
  • Lubrication: Full Pressure lubrication
  • Starting: 12 volt electric starter with Manual Recoil
  • Fuel Tank: Integral 4 Litre – 1 hour run time
  • Battery: Twin 12 volt VRLA
  • Maximum Power: Maximum output 19HP @ 3600

Pump:

  • Type of Pump Transfer: Combination: Pressure/Volume
  • Intake: 100mm (4″) BSRT or 75mm (3 1/2″) Female BSP
  • Discharge: Twin 64mm LG2 Globe Valves
  • Volute Body and Head: Marine Grade Aluminium Alloy CC601 heat treated to T6 Hardness
  • Impeller: Marine Grade Aluminium Alloy CC601 Fully Enclosed.
  • Wear Rings: Long Wearing Acetyl, Economical to replace.
  • Shaft Seal: Spring Loaded Mechanical
  • Priming: Exhaust eject will prime 3 metres in 21 seconds and up to 6 metres
  • Frame Type: Full Wrap Around Stainless Steel

Frame: Stainless Steel Full Cage
Dimensions: 800mm (L) x 530mm (W) x 580mm (H)
Weight: 114kg (incl battery)

Inlets and Outlets can be custom machined as required.
Marine version also available for use in harsh salt-water applications.

Phoenix Fire Pumps

If you need a portable fire fighting pump that will perform like a fire appliance, Phoenix Fire Pumps are what you need!

Add to quote