Description
D2000 Diesel Fire Pump
A large diesel portable fire pump that combines the benefit of high pressure fire fighting performance with large water transfer properties.
Overview of the D2000 Diesel Fire Pump:
EASY TO USE CONTROL PANEL
SIMPLE AND RAPID PRIMING – Fast and effective priming is provided by the simple to operate exhaust eject primer. The pump will prime 3 metres in 20 seconds and to a maximum of 7 metres.
HIGH PERFORMANCE DIESEL ENGINE – Engine Model 4JB1 (4 cylinder inline diesel, OHV, Direct injection, Naturally aspirated, water-cooled through heat exchanger, compression ratio 18.2:1, 57kW @ 3600 RPM, minimum fuel consumption at full load 230g/kWh.
SUPERIOR CORROSION RESISTANT CONSTRUCTION – Stainless steel is used on all fabricated parts. Spring loaded handles allow for multiple carrying positions. Marine Grade Aluminium Alloy pump end. Optional extras include a detachable wheel set that is manufactured from corrosion resistant material.
Marine Firefighting and Salvage
At 2000 litre/minute at 7 bar means a marine fire service can run four 500 litre/minute hand lines effortlessly. In other salvage relief situations where flow rather than pressure is critical, the D2000 Diesel Fire Pump gives exceptional performance delivering over 2500 litres/minute (with flooded suction). When you need big and grunty the D2000 is it.
D2000 Diesel Fire Pump Specifications:
Engine:
- Engine Series: 4JB1 57kW
- Description: 4 cylinder inline diesel, OHV, Direct injection, Naturally aspirated, water-cooled through heat exchanger, minimum fuel consumption at full load 230g/kWh
- Displacement: 2700cc
- Type: 4 cycle
- Lubrication: Full Pressure Lubrication
- Starting: 12 volt Electric Starter
- Fuel Tank: Integral 16 Litre – 1 hour run time
- Battery: 12 Volt
- Maximum Power: 57kW @ 3600 RPM
Pump:
- Type of Pump Transfer: Combination: Pressure/Volume
- Intake: 100mm BSRT Female BSP
- Discharge: Twin 64mm Globe Valves
- Volute Body and Head: Marine Grade Aluminium Alloy CC601 heat treated to T6 Hardness
- Impeller: Marine Grade Aluminium Alloy CC601 Fully Enclosed.
- Wear Rings: Long Wearing Acetyl, Economical to replace.
- Shaft Seal: Spring Loaded Mechanical
- Priming: Fast and effective priming is provided by the simple to operate exhaust eject primer. The pump will prime 3 metres in 20 seconds and to a maximum of 7 metres.
- Frame Type: Full Wrap Around Stainless Steel
Operating Controls:
All the Operating Controls and Instrumentation are located in one area making it easy to read and operate:
- Engine ON/OFF Switch
- Automatic engine pre-heat for cold starts
- Push Button Start
- Engine Hours Run Meter
- Throttle Control
- Alternator Charge Warning Lamp
- Pump Pressure Gauge
- Outlet pressure gauge
- Pump Compound Gauge
- Flexible Halogen night light
- Water Temperature Gauge
- Battery Voltage Meter
- Oil Pressure Gauge
- Fuel Level Gauge
Frame: Stainless Steel Full Cage; Fold-away handles with rubber hand grips; 100mm rubber wheels for one man portability
Dimensions: 1020mm (L) x 605mm (W) x 760mm (H)
Weight: 321kg (incl battery)
See the Phoenix D600 Portable Fire Pump
If you need a portable fire fighting pump that will perform like a fire appliance, Phoenix Fire Pumps are what you need!
