Description
Electric Smoke Ejector P244S
24″, single-speed Electric Smoke Ejector designed for high power air movement for the largest of jobs. Perfect for departments with large residential or mid sized commercial buildings.
Features a square construction for strength and stability, with four carry handles on each corner for easy positioning and rapid deployment. All components of the electric smoke ejector are 100% manufactured and assembled in the United States.
The blade is driven by a 11⁄2 Horsepower Bluffton electric motor operational with any 115- or 230-volt system. Designed with a totally enclosed air over motor casing to ensure the motor protection.
The entire frame of the Electric Smoke Ejector unit is constructed of steel and surround the four-blade 24″ recurve tip blade to enhance lifting and user safety. The blade is constructed of precision cast aluminum alloy #319 and is precision balanced and attached to the engine shaft for a direct drive connection. The unit is also designed to attach a ventilation air duct to either the inlet or outlet side of the fan and can be used in conjunction with either a spiral or “L” air ducting and its Super Vac adapters.
The front and rear safety guards are designed to OSHA and U.L. Standards to prevent accidental contact with the blade. The unit is tested to AMCA 210 for air movement and the air movement shall exceed 11,800 cubic feet per minute.
*20 amp circuit required to run on 115V
Features
Patented 4-tip recurve Aluminum Blade – holds up better than plastic in high heat
Precision Balanced Blade – maximizes output
Rubber Feet – heavy duty rubber adds friction to keep fan in place
4 Carry Handles – makes transportation easy with 2 people
Front and Rear Guards – prevents accidental contact with key components
5 Year Warranty
Specifications
Motor – Bluffton, single speed, hazardous location rated for Class 1 Group D, 11⁄2 HP, 50/60Hz, 115/230V AC
HxWxD – 28.5″ x 28″ x 18.75″ – 724 mm x 711 mm x 477 mm
Blade Diameter – 24″ – 610 mm
Weight – 115 lbs – 52 kg
RPM – 1,725
Start – 6,000 w – 20-amp circuit
Run – 2,100 w
Output (Shroud) – 7,790 cfm – 13,235 cmh
Output (Venturi) – 11,800 cfm – 20,050 cmh
See more Smoke Ejectors Here
Read the manual here
