SupaJet 1200 ARV Phoenix Portable Fire Pump :
Is a powerful light weight portable fire pump that combines the benefit of high pressure fire fighting performance with optimum water transfer properties.
High Performance Engine-
- Powered by the reliable air cooled V Twin engine the Vanguard 35HP. This 993 cc two cylinder engine develops 35 HP @ 3600 Rpm. Easily maintained through the worldwide Briggs & Stratton service dealer network to ensure maximum reliability.
- Simple and Rapid Priming
- Fast and effective priming is provided by the simple to operate push button dry sliding vane type primer. The pump will prime 3 metres in 7 seconds and to a maximum of 7.2 metres.
- Corrosion Resistant Construction
Exceptionally strong stainless steel frame with spring loaded handles to allow for multiple carrying positions. A stainless steel control panel allows for full instrumentation and operating controls from one location.
- High Level of Standard Features-
The pump comes with a wide range of standard equipment fitted.
Outlet pressure gauge
Flexible Halogen night light
Hours run meter
Oil Pressure Gauge
Battery Voltage meter
On / Off Switch
Push button start.
- Pump Specifications:-
Type: Transfer – Supply – Combination- Pressure
Intake: 100mm BSRT
Discharge: Twin Screw down aluminium globe type with Brass Spindles. Discharge 64mm BI Couplings with pressure release.
Volute Body and Head: Marine Grade Aluminium Alloy CC601 heat-treated To T6 Hardness.
Impeller: Marine Grade Aluminium Alloy CC601 heat-treated to T6 Hardness fully enclosed.
Wear Rings: Long Wearing Acetyl, Economical to replace.
Pump Shaft and Seal: Stainless Steel Pump Shaft with spring loaded Mechanical Carbon / Ceramic Seal.
Priming: Dry Sliding Vane Type With Electric Clutch, Fast And Easy To Use. Will prime 7m in 30 seconds.
Dimensions: 790mm (L) x 530mm (W) x 640mm (H)
Weight:118kg (incl. battery)
Briggs and Stratton Commercial Power, Vanguard VTwin air-cooled, overhead valve.
Output: Maximum 35HP (25kw) @ 3600 RPM. 57 cu. In.
Displacement: 993cc, 4 cycle. Full pressure lubrication.
Fuel Tank: Integral 12 Litre Starter: 12 volt electric with emergency manual recoil
Download Specifications Sheet
Typical Performance at 3 metre suction lift
Additional Features Include:
Twin 63mm screw down globe valves which will allow for a variety of coupling types.
Inlet 100mm BSRT (or optoinal 3.5″ FBSP to take a variety of inlet adaptors)
A large stainless steel fuel tank with capacity of 10.0 litres or the optional 12L Plastic fuel tank that ensures the fuel supply will last for up to 1 hour at maximum throttle opening.
Electric starting is standard with a 12 – volt negative earth system. The battery is a 12V VRLA type and is completely maintenance free. This type of battery can stay fully charged for up to 12 months without the need for recharging. A sealed regulator and internal 16 amp alternator provides reliable power. A robust hand start allows the engine to be started in the event of low battery power.
Extras include LED flood lighting.
Municipal Fire Brigades
1200 litre/minute at 7 bar means a fire service can run two 600 litre/minute hand line effortlessly.
Rural Fire Fighters
The powerful 993cc engine means that both urban and rural fire fighters can get maximum performance out of the 129Kg package (Fully operational including full fuel tank and oil).
In situations where flow rate rather than pressure is needed the SupaJet 1200 delivers over 1700 Litres per minute (with flooded suction).