Call us today on
for your obligation-free quote!

SupaJet 1300 EFI Vortex Portable Fire Pump


SupaJet 1300 Vortex Portable Fire Pump

A powerful yet lightweight Vortex portable fire pump combining the benefit of high pressure firefighting with optimum water transfer properties backed up with ultra fuel efficiency. The SupaJet 1300 Vortex Portable Fire Pump is quality and performance redefined.

Key Features:

DRY-RUNNING ROTARY VANE PRIMER – No oily discharge when priming, will prime 3 metres within 10 seconds, and 7 metres in less than 30 seconds. Simple push button priming.

EASY TO USE CENTRALLY LOCATED CONTROL PANELS – highly functional stainless steel control panel with pump, primer and engine control at your finger tips in one convenient location.

PULL-START ENGINE – a robust manual recoil starter with back up power to enable starting even with a flat battery.

CORROSION RESISTANT CONSTRUCTION WITH MULTI-DIRECTIONAL HANDLES – Exceptionally strong stainless steel full wrap-around frame with spring loaded handles to allow for multiple carry positions.

Typical performance @ 3 metres suction lift:

400 kPa (58 PSI) 1740 Litres/min
600 kPa (87 PSI) 1535 Litres/min
700 kPa (101.5 PSI) 1300 Litres/min
800 kPa (116 PSI) 1220 Litres/min
1000 kPa (145 PSI) 900 Litres/min

Municipal Fire Brigades – 1300 litre/minute at 7 bar means a fire service can run two 650 litre/minute hand lines effortlessly.

Rural Fire Fighters – The powerful 993cc engine means that both urban and rural fire fighters can get maximum performance out of the 129Kg package (Fully operational including full fuel tank and oil).

Flood Relief – In situations where flow rate rather than pressure is needed the SupaJet 1300EFI delivers over 1800 Litres per minute (with flooded suction).

SupaJet 1300 Vortex Portable Fire Pump Features:

Pump Specifications:

Type of Pump Transfer: Combination: Pressure/Volume
Intake: 4” (100mm) BSRT or 3-1/2” (75mm) FMBSP
Discharge: Twin 2-1/2” (64mm) MBSP Globe Valves
Volute Body and Head: CC601 Marine Grade Aluminium Heat Treated to T6 condition
Impeller: CC601 Marine Grade Aluminium Optional LG2 Bronze available
Wear Rings: Long Wearing Acetyl, Economical to replace.
Shaft Seal: Spring Loaded Carbon Ceramic
Priming: Dry Rotary Vane, will prime 3 metres in 10 seconds & 7m in 30 seconds
Frame Type: Full Wrap Around Stainless Steel

Engine Specifications:

Engine Model: Briggs and Stratton Commercial Power
Type: Vanguard V-Twin air-cooled, electronic fuel injection, overhead valve Displacement: 993CC, 4 cycle, full pressure lubrication. Up to 30% fuel saving with EFI
Fuel Tank: Integral 12 litre nylon fuel tank. Optional 10 litre stainless steel fuel tank
Dry Weight: 119kg (incl battery)
Dimensions: 790mm (L) x 530mm (W) x 640mm(H)

Control Panel:

All the Operating Controls and Instrumentation are located in one area making it easy to read and operate:


  • Engine On/Off Switch
  • Push Button Engine Start
  • 12volt Inlet/Outlet Socket
  • Engine Hours Run Meter
  • Voltage Meter
  • Oil Pressure Meter
  • Fuel Level Meter
  • Throttle Control
  • Push Button Primer
  • Pump Pressure Gauge
  • Pump Compound Gauge
  • LED Lighting

Extra Features of the SupaJet 1300 Vortex Portable Fire Pump:

  • Twin 63mm screw down globe valves which will allow for a variety of coupling types.
  • Inlet 100mm BSRT (or optoinal 3.5″ FBSP to take a variety of inlet adaptors)
  • A large stainless steel fuel tank with capacity of 10.0 litres or the optional 12L Plastic fuel tank that ensures the fuel supply will last for up to 1 hour at maximum throttle opening.
  • Electric starting is standard with a 12 – volt negative earth system. The battery is a 12V VRLA type and is completely maintenance free. This type of battery can stay fully charged for up to 12 months without the need for recharging. A sealed regulator and internal 55 amp alternator provides reliable power. A robust hand start allows the engine to be started in the event of low battery power.
  • Extras include LED flood lighting.

See the SupaJet 23 Phoenix Portable Fire Pump

If you need a portable fire fighting pump that will perform like a fire appliance, Phoenix Fire Pumps are what you need!

Add to quote