Typical performance @ 3 metres suction lift:

400 kPa (58 PSI) 1740 Litres/min
600 kPa (87 PSI) 1535 Litres/min
700 kPa (101.5 PSI) 1300 Litres/min
800 kPa (116 PSI) 1220 Litres/min
1000 kPa (145 PSI) 900 Litres/min
Stainless Steel Frame with Wheel Set
Controls are easy to operate from one location
Engine On/Off switch
12V electric starter with manual recoil
Engine hours meter
Choke Control
Compound Gauge
12V in/out socket
Pump Specifications
Type: Centrifugal pump for dewatering purpose driven on petrol engine
Intake: 100mm BSRT
Discharge: Twin screw down valve with 64mm Male BSP threads
Volute Body and Head: Marine Grade Aluminium Alloy CC601 heat-treated to T6 Hardness
Impeller: Marine Grade Aluminium Alloy CC601 heat-treated to T6 Hardness, fully enclosed
Wear Rings: Long wearing acetyl, economical to replace
Pump Shaft and Seal: Stainless steel pump shaft with spring-loaded mechanical carbon/ceramic seal
Priming: Dry sliding vane type with electric clutch, fast and easy to use. Will prime 7 metres in less than 30 seconds
Engine Specifications
Engine Model: Briggs and Stratton Commercial Power
Type: Vanguard V-Twin air-cooled, electronic fuel injection, overhead valve Displacement: 993CC, 4 cycle, full pressure lubrication. Up to 30% fuel saving with EFI
Fuel Tank: Integral 12 litre nylon fuel tank. Optional 10 litre stainless steel fuel tank
Dry Weight: 119kg (incl battery)
Dimensions: 790mm (L) x 530mm (W) x 640mm(H)
Download Specifications Sheet